Programming Guide
Table Of Contents
- 1. Programming Overview
- 2. SCPI Overview
- 3. Commands that are Common to All Modes
- 4. Spectrum Analyzer
- 5. Modulation Analyzer
- 6. Programming Examples
SIGLENT
SSA3000X Plus Programming Guide 23
Command
Format
:SYSTem:PRESet:TYPE DFT|LAST|USER
:SYSTem:PRESet:TYPE?
Instruction
Uses this command to preset the analyzer to default, user, or last state.
Gets preset type.
Parameter
Type
Enumeration
Parameter
Range
DFT: Default
LAST: Last
USER: Custom Configuration
Return
Enumeration
Default
DFT
Menu
System > Pwr/Preset > Preset
Example
:SYSTem:PRESet:TYPE DFT
Command
Format
:SYSTem:PRESet:USER[1]|2|3|4|5|6|7:SAVE
Instruction
Save current setting to user config
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
System > Pwr/Preset > User Config
Example
:SYSTem:PRESet:USER7:SAVE
Command
Format
:SYSTem:PRESet:USER[1]|2|3|4|5|6|7:LOAD
Instruction
load user config
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
System > Pwr/Preset > User Config
Example
:SYSTem:PRESet:USER6:LOAD
Command
Format
:SYSTem:FDEFault