Programming Guide

SIGLENT
72 SSA3000X Plus Programming Guide
Instruction
Return the upper adjacent channel power to main channel power ratio.
Parameter
Type
None
Parameter
Range
None
Return
Float
Default
None
Menu
Meas > ACPR
Example
:MEASure:ACPRatio:UPPer?
4.9.2 CHP Subsection
[:SENSe]:CHPower:BWIDth:INTegration
[:SENSe]:CHPower:FREQuency:SPAN:POWer
:MEASure:CHPower?
:MEASure:CHPower:CHPower?
:MEASure:CHPower:DENSity?
Command
Format
[:SENSe]:CHPower:BWIDth:INTegration <freq>
[:SENSe]:CHPower:BWIDth:INTegration?
Instruction
Specifies the integration bandwidth to calculate the power.
Gets the integration bandwidth.
Parameter
Type
Float, unit: Hz, kHz, MHz, GHz
Parameter
Range
100 Hz~1.5 GHz
Zero Span: 0~1.5 GHz
Return
Float, unit: Hz
Default
2 MHz
Menu
Meas > Ch Power > Meas Setup > Integration BW
Example
:CHPower:BWIDth:INTegration 1.0 GHz
Command
Format
[:SENSe]:CHPower:FREQuency:SPAN:POWer
Instruction
Sets the analyzer span for the channel power measurement. Be sure the
span is set larger than the integration bandwidth.
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
Meas > Ch Power > Meas Setup > Span