Programming Guide

SIGLENT
56 SSA3000X Plus Programming Guide
Default
None
Menu
Marker > M→CF Step
Example
:CALCulate:MARKer1:STEP
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8[:SET]:RLEVel
Instruction
This command sets the reference level equal to the specified marker
frequency.
This command is valid when the Marker is on.
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
Marker > M→Ref Level
Example
:CALCulate:MARKer2:RLEVel
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:DELTa[:SET]:SPAN
Instruction
This command sets the span equal to the specified delta marker frequency.
This command can be only used in DELTa|BAND marker mode, Reference
Command:CALCulate:MARKer[1]|2|3|4|5|6|7|8:MODE
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
Marker > △ M→Span
Example
:CALCulate:MARKer2:DELTa:SPAN
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:DELTa[:SET]:CENTer
Instruction
This command sets the center frequency equal to the specified delta marker
frequency.
This command can be only used in DELTa|BAND marker mode, Reference
Command:CALCulate:MARKer[1]|2|3|4|5|6|7|8:MODE
Parameter
Type
None
Parameter
Range
None
Return
None