Programming Guide

SIGLENT
52 SSA3000X Plus Programming Guide
Parameter
Type
Boolean
Parameter
Range
OFF|ON|0|1
Return
0|1
Default
OFF
Menu
Marker
Example
:CALCulate:MARK1:STATe ON
Command
Format
:CALCulate:MARKer:AOFF
Instruction
Turn all the markers off.
Parameter
Type
None
Parameter
Range
None
Return
None
Default
None
Menu
None
Example
:CALCulate:MARKer:AOFF
Command
Format
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:MODE POSition|DELTa|BAND|OFF
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:MODE?
Instruction
Selects the type of markers that you want to activate.
Gets the type of markers.
Parameter
Type
Enumeration
Parameter
Range
POSition: selects a normal marker that can be positioned on a trace and
from which trace information will be generated.
DELTa: activates a pair of markers, one of which is fixed at the current
marker location. The other marker can then be moved around on the trace.
The marker readout shows the marker value which moves.
BAND: activates a pair of markers, one of which is fixed at the current
marker location. The two marker can then be moved around on the trace.
The marker readout shows the difference between the two markers.
OFF: turns the designated marker off. If a marker is not active when the
mode is queried, “off” will be returned.
Return
Enumeration
Default
OFF
Menu
Marker
Example
:CALCulate:MARK1:MODE POSition