User Manual

SIGELNT
46 SPD1000X User Manual
as follows.
Example
SYSTem: STATus?
Return info
0x0224
Explanation: The returned information is hexadecimal, so the user needs to
convert to binary format when confirming the status. See the following table:
Bit NO.
Corresponding state
0
0: CV mode 1: CC mode
4
0: Output OFF 1: Output ON
5
0: 2W mode 1: 4W mode
6
0: TIMER OFF 1: TIMER ON
8
0: digital display; 1: waveform display
12、 IPaddr
Command format
IPaddr <IP address>
Description
Used to assign a Static Internet Protocol (IP) address to
the instrument
Example
Explanation
IPaddr 10.11.13.214
This command is invalid when the power is currently set
to automatically obtain the network configuration (DHCP
is ON)
Command format
IPaddr?
Description
Query the software the setting of IP address
Example
SYSTem: VERSion?