User Manual

SIGELNT
II SPD1000X User Manual
General Safety Summary
Please review the following safety precautions carefully to avoid personal
injury or damage to this product or any product connected to it. To prevent
potential danger, please use the instrument as specified.
Use the proper power cord
Only the power cord designed for the instrument and authorized by the local
country should be used.
Power supply
AC Input Voltages: 100/120/220/230 V ± 10%，50/60 Hz
Use the proper fuse
The fuse type: 100/120 V: T6.3A/250V
220/230 V : T3.15A/250V
Make sure to use the correct type of fuse before turning on the instrument.
Find the cause of the fuse failure before replacing the fuse and connecting
the power cord.
Ground the instrument
The instrument is grounded through the protective Earth conductor of the
power cord. To avoid electric shock, the grounding conductor must be
connected to the Earth ground. Make sure that the instrument is properly
grounded before any activating any inputs or outputs.
Examine all the terminal ratings