User Manual

SIGELNT
20 SPD1000X User Manual
cursor
b) Press Fine button to select the cursor’s position, then rotate the
knob to adjust the parameter.
3、 Open the 4-wire mode
Press Vsense button, the button will light up. The power supply
screen will show ‘4 wire’ on the display.
4、 Enable the output
Press the on/off button, the button light is lit and the power supply
display shows “on”.
Note: In 4-wire mode, the maximum compensation voltage of the power
supply is 1 V. When the voltage difference between the output terminal
and the Sense terminal is more than 1 V, the instrument will turn off
automatically.