Data Sheet

SDS2000X-E Series Digital Oscilloscope
WWW.SIGLENT.COM
Horizontal System
Timebase Scale 500 ps/div-100 s/div
Channel Skew <100 ps
Waveform Capture Rate Up to 110,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)
Intensity Grading 256 Levels
Display Format Y-T, X-Y, Roll
Timebase Accuracy ±25 ppm
Roll Mode 50 ms/div-100 s/div (1-2-5 step)
Trigger System
Trigger Mode Auto, Normal, Single
Trigger Level
Internal: ±4.5 div from the center of the screen
EXT: ±0.6 V
EXT/5: ±3 V
Holdoff Range 80 ns - 1.5 s
Trigger Coupling
AC
DC
LFRJ
HFRJ
Noise RJ
Coupling Frequency Response
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 8 Hz
LFRJ: Blocks the DC component and attenuates the low-frequency components below 2 MHz
HFRJ: Attenuates the high-frequency components above 1.2 MHz
Coupling Frequency Response (EXT)
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 10 Hz
LFRJ: Blocks the DC components and attenuates low-frequency components below 6 KHz
HFRJ: Attenuates high-frequency components above 200 KHz
Trigger Accuracy (typical)
Internal: ±0.2 div
EXT: ±0.4 div
Trigger Sensitivity
DC - Max BW 0.6 div
EXT: 200 mVpp DC – 10 MHz
300 mVpp 10 MHz - BW frequency (External 50 Ω)
EXT/5: 1 Vpp DC – 10 MHz
1.5 Vpp 10 MHz -BW frequency (External 50 Ω)
Trigger Jitter < 100 ps
Trigger Displacement Pre-Trigger: 0 - 100% Memory
Delay Trigger: 0 to 10,000 div
Edge Trigger
Slope Rising, Falling, Rising&Falling
Source All channels / EXT / (EXT/5) / AC Line
Slope Trigger
Slope Rising, Falling
LimitRange <, >, <>, ><
Source All channels
TimeRange 2 ns - 4.2 s
Resolution 1 ns