User Manual

SDS1000X-U Series Digital Oscilloscope
8 WWW.SIGLENT.COM
Overshoot (500 ps
Pulse)
< 10%
Horizontal System
Timebase Scale
2 ns/div-100 s/div
Channel Skew
<100 ps
Waveform Capture
Rate
Up to 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)
Intensity grading
256 Levels
Display Format
Y -T, X -Y, Roll
Timebase Accuracy
±25 ppm
Roll Mode
50 ms/div-100 s/div (1-2-5 sequence)
Trigger System
Mode
Auto, Normal, Single
Level
Internal: ±4.5 div from the center of the screen
Hold off range
80 ns- 1.5 s
Coupling
AC
DC
LFRJ
HFRJ
Noise RJ
Coupling Frequency
Response
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 8Hz
LFRJ: Blocks the DC component and attenuates the low-frequency
components below 2 MHz
HFRJ: Attenuates the high-frequency components above 1.2 MHz
Accuracy (typical)
Internal: ±0.2 div
Sensitivity
DC - Max BW 0.6 div
Jitter
<100 ps
Displacement
Pre-Trigger: 0 - 100% Memory
Delay Trigger: 0 to 10,000 div
Edge Trigger
Slope
Rising, Falling, Rising & Falling
Source
All channels/AC Line
Slope Trigger
Slope
Rising, Falling
Limit Range
＜, ＞, ＜＞, ＞＜
Source
All channels
Time Range
2ns- 4.2s
Resolution
1ns
Pulse Width Trigger
Polarity
+wid , -wid
Limit Range
＜, ＞, ＜＞, ＞＜