User Manual

SDS1000X-U Series Digital Oscilloscope
WWW.SIGLENT.COM
5
True measurement to 14 M points
Gate and Zoom Measurement
SDS1004X-U can measure all sampled data points up to 14
Mpts. This ensures the accuracy of measurements while the
math co-processor decreases measurement time and
increases ease-of-use.
Through Gate and Zoom measurement, the user can
specify an arbitrary interval of waveform data analysis and
statistics. This helps avoid measurement errors that can be
caused by invalid or extraneous data, greatly enhancing
the measurements’ validity and flexibility.
128k points used to calculate the FFT
Hardware-Based High-Speed Pass/Fail
The new math co-processor enables FFT analysis of
incoming signals using up to 128k samples per waveform.
This provides high frequency resolution with a fast refresh
rate. The FFT function also supports a variety of window
functions so that it can adapt to different spectrum
measurement needs. Four-channel series support Peaks,
Markers, a variety of numbers.
The SDS1000X-U utilizes a hardware-based Pass/Fail
function, performing up to 40,000 Pass / Fail decisions each
second. Easily generate user defined test templates
provide trace mask comparison making it suitable for long-
term signal monitoring or automated production line
testing.