User Manual

WWW.SIGLENT.COM
1
Product Overview
SIGLENT’s SDS1000X-U Series Super Phosphor Oscilloscopes
is available in one bandwidth, 100 MHz. It has a maximum
sample rate of 1 GSa/s and a maximum record length of 14
Mpts. For ease-of-use, the most commonly used functions
can be accessed with its user-friendly front panel design.
The SDS1000X-U series employs a new generation of SPO
(Super -Phosphor Oscilloscope) technology that provides
excellent signal fidelity and performance. It comes with an
innovative digital trigger system with high sensitivity and
low jitter, and a waveform capture rate of 400,000
frames/sec (sequence mode). The SDS1000X-U also
employs a 256-level intensity grading display function and
a color temperature display mode not found in other models
in this class. SIGLENT’s latest oscilloscope offering supports
multiple powerful triggering modes including serial bus
triggering. Serial bus decoding for IIC, SPI, UART, CAN, and
LIN bus types are included. The X-U models also include
History waveform recording and sequential triggering that
enable extended waveform recording and analysis. Another
powerful addition is the new 128k point FFT math function
that gives the SDS1000X-U very high frequency resolution
when observing signal spectra. The new digital design
includes a hardware co-processor that delivers
measurements quickly and accurately without slowing
acquisition and front-panel response. SDS1000X-U also
supports searching and navigating. The features and
performance of SIGLENT’s new SDS1000X-U cannot be
matched anywhere else in this price class.
SDS1104X-U
Key Features
100MHz bandwidth
Real-time sampling rate up to 1 GSa/s
The newest generation of SPO technology
 Waveform capture rates up to 100,000 wfm/s
(normal mode) and 400,000 wfm/s (sequence
mode)
 Supports 256-level intensity grading and color
temperature display modes
 Record length up to 14 Mpts
 Digital trigger system
Intelligent trigger: Edge, Slope, Pulse Width, Window,
Runt, Interval, Time out (Dropout), Pattern
Serial bus triggering and decoding (Standard), supports
protocols IIC, SPI, UART, CAN, LIN
Video trigger, supports HDTV
10 types of one-button shortcuts, supports Auto Setup,
Default, Cursors, Measure, Roll, History, Display/Persist,
Clear Sweep, Zoom and Print
Segmented acquisition (Sequence) mode, divides the
maximum record length into multiple segments (up to
80,000), according to trigger conditions set by the user,
with a very small dead time segment to capture the
qualifying event
History waveform record (History) function (maximum
recorded waveform length is 80,000 frames)
Automatic measurement function for 38 parameters as
well as Measurement Statistics, Zoom, Gating, Math,
History and Reference functions
128k pts FFT, supports Peaks and Markers
Math and measurement functions use all sampled data
points (up to 14 Mpts)
Math functions (FFT, addition, subtraction,
multiplication, division, integration, differential, square
root)
Preset key can be customized for user settings or factory
“defaults”
Security Erase mode
High Speed hardware-based Pass/ Fail function
Search and navigate
Large 7-inch TFT-LCD display with 800 * 480 resolution
Multiple interface types: USB Host, USB Device (USB -
TMC), LAN, Pass / Fail, Trigger Out
Supports SCPI remote control commands
VXI-11+SCPI, Telnet (Port 5024) +SCPI and Socket (Port
5025) +SCPI programming over LAN
Supports Multi-language display and embedded online
help