SDS1000X-U Digital Oscilloscope Data Sheet Rev. DS010AH _E01A Sept.
Key Features 100MHz bandwidth Real-time sampling rate up to 1 GSa/s SDS1104X-U The newest generation of SPO technology Waveform capture rates up to 100,000 wfm/s (normal mode) and 400,000 wfm/s (sequence mode) Supports 256-level intensity grading and color temperature display modes Record length up to 14 Mpts Digital trigger system Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time out (Dropout), Pattern Product Overview Serial bus triggering and decoding (Standard), sup
SDS1000X-U Series Digital Oscilloscope Models and Key Specifications Model Bandwidth 100 MHz Sample rate (Max.) 1 GSa/s (One channel), 500 MSa/s(Two channels), 250 MSa/s(Four channels) Channels 4 Memory depth (Max.) 14 Mpts Waveform capture rate (Max.
SDS1000X-U Series Digital Oscilloscope Functions & Characteristics 7 Inch TFT-LCD Display and 10 One-button Menus 7 -inch TFT -LCD display with 800 * 480 resolution Most commonly used functions are accessible using 10 different one-button operation keys: Auto Setup, Default, Cursor, Measure, Roll, History, Persist, Clear Sweep, Zoom, Print Record Length of up to 14 Mpts Using hardware-based Zoom technologies and max record With a waveform capture rate of up to 400,000 wfm/s length of up to 14 M
SDS1000X-U Series Digital Oscilloscope 256-Level Intensity Grading and Color Temperature Display SPO display technology provides fast refresh rates. The The color temperature display is similar to the intensity- resulting intensity-graded trace is brighter for events that graded trace function, but the trace occurrence is occur with more frequency and dims when the events occur represented by different colors (color “temperature”) as with less frequency.
SDS1000X-U Series Digital Oscilloscope True measurement to 14 M points Gate and Zoom Measurement SDS1004X-U can measure all sampled data points up to 14 Through Gate and Zoom measurement, the user can Mpts. This ensures the accuracy of measurements while the specify an arbitrary interval of waveform data analysis and math co-processor decreases measurement time and statistics. This helps avoid measurement errors that can be increases ease-of-use.
SDS1000X-U Series Digital Oscilloscope Customizable Default Key Search and Navigate The current parameters of the oscilloscope can be preset to The SDS1000X-U can search events specified by the user in Default Key through the Save menu. a frame. It can also navigate by time (delay position) and historical frames. Complete Connectivity SDS1000X-U supports USB Host, USB Device (USB-TMC), LAN (VXI-11), Pass/Fail and Trigger Out 6 WWW.SIGLENT.
SDS1000X-U Series Digital Oscilloscope Specifications Acquisition System Sampling Rate (Max.) 1 GSa/s (One channel), 500 MSa/s(Two channels), 250 MSa/s(Four channels) Memory Depth (Max.) 14 Mpts Peak Detect 2 ns Average Averages: 4,16, 32, 64, 128, 256, 512, 1024 ERES Enhance bits: 0.5, 1, 1.5, 2, 2.5, 3 Waveform interpolation Sin(x)/x, Linear Input Channels 4 Coupling DC, AC, GND Impedance DC: (1 MΩ±2%) || (15 pF ±2 pF) Max.
SDS1000X-U Series Digital Oscilloscope Overshoot (500 ps Pulse) < 10% Horizontal System Timebase Scale 2 ns/div-100 s/div Channel Skew <100 ps Waveform Capture Rate Up to 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode) Intensity grading 256 Levels Display Format Y -T, X -Y, Roll Timebase Accuracy ±25 ppm Roll Mode 50 ms/div-100 s/div (1-2-5 sequence) Trigger System Mode Auto, Normal, Single Level Internal: ±4.5 div from the center of the screen Hold off range 80 ns- 1.
SDS1000X-U Series Digital Oscilloscope Source All channels Pulse Range 2 ns - 4.2s Resolution 1 ns Video Trigger Signal Standard NTSC，PAL，720p/50，720p/60，1080p/50，1080p/60，1080i/50，1080i/60，Custom Source All channels Sync Any, Select Trigger condition Line, Field Window Trigger Window Type Absolute, Relative Source All channels Interval Trigger Slope Rising, Falling Limit Range ＜, ＞, ＜＞, ＞＜ Source All channels Time Range 2 ns - 4.
SDS1000X-U Series Digital Oscilloscope Addr & Data: 1-2byte Data Length: 1-12byte R/W bit Addr & Data: Read, Write, Do not care SPI Trigger Condition Data Source(CS/CL/Data) All channels Data format Binary Data Length 4-96-bit Bit Value 0, 1, X Bit Order LSB, MSB UART Trigger Condition Start, Stop, Data, Parity Error Source(RX/TX) All channels Data format Hex Limit Range =, >, < Data Length 1 byte Data Width 5, 6, 7, 8-bits Parity Check None, Odd, Even, Space, Mark Stop Bit 1,
SDS1000X-U Series Digital Oscilloscope ROLL: No limitation Stop After ROLL: 700 Serial Decoder Decoders 2 I2C Signal SCL, SDA Address 7, 10 bits Threshold List -4.5 - 4.5 div 1- 7 lines SPI Signal SCL,MISO, MOSI Edge Select Rising, Falling Idle Level Low, High Bit Order MSB, LSB Threshold List -4.5 - 4.5 div 1- 7 lines UART Signal RX, TX Data Width 5，6，7，8 bits Parity Check None, Odd, Even, Space, Mark Stop Bit 1, 1.5, 2 bits Idle Level Low, High Threshold List -4.5 - 4.
SDS1000X-U Series Digital Oscilloscope Parameters Max Highest value in input waveform Min Lowest value in input waveform Pk-Pk Difference between maximum and minimum data values Ampl Difference between top and base in a bimodal signal, or between max and min in an unimodal signal Vertical Top Value of most probable higher state in a bimodal waveform Base Value of most probable lower state in a bimodal waveform Mean Average of all data values Cmean Average of data values in the first cycle
SDS1000X-U Series Digital Oscilloscope edge of channel B FFR Time from the first falling edge of channel A to the following first rising edge of channel B FFF Time from the first falling edge of channel A to the following first falling edge of channel B LRR Time from the first rising edge of channel A to the last rising edge of channel B LRF Time from the first rising edge of channel A to the last falling edge of channel B LFR Time from the first falling edge of channel A to the last rising edge o
SDS1000X-U Series Digital Oscilloscope Language Simplified Chinese, Traditional Chinese, English, French, Japanese, Korean, German, Russian, Italian, Portuguese Environments Temperature Humidity Height Operating: 0℃ - +40℃ Non-operating: -20℃ - + 60℃ Operating: 85% RH, 40 ℃, 24 hours Non-operating: 85% RH, 65 ℃, 24 hours Operating: ≤ 3000 m Non-operating: ≤ 15,000 m Standards Electromagnetic compatibility Meets EMC directive (2014/30/EU), meets or exceeds IEC 61326-1:2012/EN61326-1:2013 (Basic) Condu
SDS1000X-U Series Digital Oscilloscope Mechanical Length: 312 mm Dimensions Width: 132.6 mm Height: 151 mm Weight N.W: 2.6 kg; G.W: 3.8 kg Probes and Accessories Probe Passive Picture Model Specifications &Description PP510 Bandwidth: 100MHz, 1X/10X, 1M/10Mohm,300V/600V Bandwidth: 100 KHz, Max. continuous current: 20Arms CP4020 Peak current: 60A Switch Ratio: 50mV/A, 5mV/A, Accuracy: 50mV/A (0.4A 10Apk)±2%, 5mV/A (1A-60Apk) ±2%, 9V battery source Bandwidth: 1MHz, Max.
SDS1000X-U Series Digital Oscilloscope Bandwidth: 12 MHz, Max. continuous current: 150Arms, CP5150 Peak current: 300A Switch Ratio: 100mV/A, 10mV/A, Accuracy: 100mV/A (±1%±10mA), 10mV/A (±1%±100mA), DC12V/1.2A power adapter Bandwidth: 5 MHz, Max. continuous current: 500Arms, CP5500 Peak current: 750A Switch Ratio: 100mV/A, 10mV/A, Accuracy: 100mV/A (±1%±10mA), 10mV/A(±1%±100mA), DC12V/1.
SDS1000X-U Series Digital Oscilloscope Demo Board STB-3 Test Output signals including square, sine, AM, fast edge, pulse, Board PWM, I2C, CAN, LIN etc. Used in teaching and demonstrations. Rack Mount WWW.SIGLENT.COM 17 SDS1X-E-RMK The height is 4U.
SDS1000X-U Series Digital Oscilloscope Ordering Information Ordering information Product Name SDS1104X-U 100MHz Four Channels USB Cable -1 Quick Start -1 Standard Accessories Passive Probe -4 Certification -1 Power Cord -1 Optional Accessories Isolated Front End ISFE STB Demo Source STB-3 High Voltage Probe HPB4010 CP4020/CP4050/CP4070/ Current Probes CP4070A/CP5030/CP5030A/ CP5150/CP5500 Differential Probes Rack Mount 18 WWW.SIGLENT.
SDS1000X-U Series Digital Oscilloscope WWW.SIGLENT.
