Programming Guide

Digital Oscilloscopes Series
76
DISPLAY
INVERTSET,INVS
Command/Query
DESCRIPTION
The INVERTSET command inverts the specified
traces or the math waveform.
The response to the INVERTSET? query indicates
whether the specified waveform is inverted or not.
COMMAND SYNTAX
<trace>:INVERTSET < state >
< trace > : = {C1,C2,C3,C4,MATH}
< state >:= {ON,OFF}
QUERY SYNTAX
<trace>:INVERTSET?
RESPONSE FORMAT
<trace>:INVERTSET < state >
EXAMPLE
The following instruction inverts the trace of
channel 1:
Command message:
C1:INVS ON