Programming Guide

Digital Oscilloscopes Series
63
FUNCTION
FILTER,FILT
Command /Query
DESCRIPTION
The FILTER command enables or disables filter of
the specified trace.
The response to the FILTER? query indicates
whether the filter of specified trace is enabled.
COMMAND SYNTAX
<channel>:FILTER <state>
<channel> : = {C1,C2,C3,C4}
<state> : = {ON,OFF}
QUERY SYNTAX
<channel>:FILTER?
RESPONSE FORMAT
<channel>:FILTER <state>
EXAMPLE
The following command enables the filter of
channel 1:
Command message:
C1:FILT ON
RELATED COMMANDS
FILTS
Note:
This command is suitable for non-SPO models.