Programming Guide

Digital Oscilloscopes Series
53
MASS STORAGE
FILENAME, FLNM
Command /Query
DESCRIPTION
The FILENAME command is used to change the
default filename given to any traces, setups and
hard copies when they are being stored to a mass
storage device.
COMMAND SYNTAX
FiLeNaMe TYPE, <type>, FILE, ‗<filename>‘
<type>:={ C1,C2,C3, C4, SETUP,TA, TB, TC, TD,
HCOPY}
<filename> : = an alphanumeric string of up to 8
characters forming a legal DOS filename.
Note:
The file‘s extension can be specified automatically
by the oscilloscope.
QUERY SYNTAX
FiLeNaMe? TYPE, <type>
<type> :={ ALL, C1, C2, C3, C4, SETUP, TA, TB,
TC, TD, HCOPY}
RESPONSE FORMAT
FiLeNaMe TYPE, <type>, FILE, ―<filename>‖
[,TYPE, <type>, FILE, ―<filename>‖...]
EXAMPLE
The following command designates channel 1
waveform files to be ―TESTWF.DAV‖:
Command message:
FLNM TYPE, C1, FILE, ‗TESTWF‘
RELATED COMMANDS
DIRECTORY, DELETE_FILE