Programming Guide

Digital Oscilloscopes Series
137
ACQUISITION
UNIT, UNIT
Command /Query
DESCRIPTION
The UNIT command sets the unit of the specified
trace.
The UNIT query returns the unit of the specified
trace.
COMMAND SYNTAX
<channel>: UNIT <type>
<channel>：= {C1, C2, C3, C4}
<type>：= {V,A}
QUERY SYNTAX
<channel> : UNIT?
RESPONSE FORMAT
<channel>: UNIT <type>
EXAMPLE
The following command sets the unit of the
channel 1 to V:
Command message:
C1: UNIT V