Programming Guide

Digital Oscilloscopes Series
134
ACQUISITION
TRIG_SLOPE, TRSL
Command /Query
DESCRIPTION
The TRIG_SLOPE command sets the trigger
slope of the specified trigger source.
The TRIG_SLOPE? query returns the trigger
slope of the selected source.
COMMAND SYNTAX
<trig_source>: TRig_SLope <trig_slope>
<trig_source>: = {C1, C2, C3, C4, EX,EX5 }
<trig_slope>: = {NEG,POS,WINDOW}
QUERY SYNTAX
<trig_source>: TRig_Slope?
RESPONSE FORMAT
<trig_source>: TRig_Slope <trig_slope>
EXAMPLE
The following sets the trigger slope of Channel 2
to negative:
Command message:
C2: TRSL NEG
RELATED COMMANDS
TRIG_COUPLING,TRIG_DELAY,TRIG_LEV
EL,TRIG_MODE,TRIG_SELECT,
TRIG_SLOPE