Programming Guide

Digital Oscilloscopes Series
115
WAVEFORM TRANSFER
STORE_SETUP,STST
Command/Query
DESCRIPTION
The STORE_SETUP command controls the
way in which traces will be stored. A single
trace or all displayed traces may be enabled for
storage.
COMMAND SYNTAX
STore_SeTup [<trace>, <dest>]
<trace>:= {C1,C2,C3,C4,ALL_DISPLAYED }
<dest>: ={UDSK}
Note:
The <dest> parameter is vary with
oscilloscope‘s models. If your oscilloscope is
not an SPO model, it‘s options are
{M1~M10(or M20 in the CFL series)},
UDSK}. If your oscilloscope is an SPO model,
its option is {UDSK}.
QUERY SYNTAX
STore_SeTup?
RESPONSE FORMAT
STore_SeTup <trace>, <dest>
EXAMPLE
The following command selects Channel 1 to
be stored.
Command message:
STST C1, UDSK
RELATED COMMANDS
STORE,INR