Programming Guide

Digital Oscilloscopes Series
114
SAVE/RECALL SETUP
STORE_PAMEL,STPN
Command
DESCRIPTION
The STORE_PANEL command stores the
complete front-panel setup of the instrument, at
the time the command is issued, into a file on
the specified-DOS path directory in a USB
memory device.
COMMAND SYNTAX
STore_PaNel DISK, <device>, FILE,
‗<filename>‘
<device>：={UDSK}
< directory >：=A legal DOS path or filename.
A filename -string of up to 8 characters, with
the extension “.SET”. (This can include the
‗/‘ character to define the root directory.)
EXAMPLE
The following code saves the current
instrument setup to root directory of the USB
memory device in a file called ―SEAN.SET‖:
Command message:
STore_PaNel DISK,UDSK,FILE,'SEAN.SET'
The following code saves the current
instrument setup to specified-directory of the
USB memory device in a file called
―SEAN.SET‖:
Command message:
STore_PaNel DISK,UDSK,FILE,
'/AAA/SEAN'
RELATED COMMANDS
*SAV, RECALL_PANEL, *RCL