Programming Guide

Digital Oscilloscopes Series
102
SAVE/RECALL SETUP
RECALL_PANEL, RCPN
Command
DESCRIPTION
The RECALL_PANEL command recalls a
front-panel setup from the current directory on
mass storage.
COMMAND SYNTAX
ReCall_PaNel DISK, <device>, FILE,
‗<filename>‘
<device> : = {UDSK}
<filename>：= A waveform file under a legal
DOS path . A filename-string of up to eight
characters, with the extension “.SET”. (This
can include the ‗/‘ character to define the root
directory.)
EXAMPLE
The following recalls the front-panel setup
from file SEAN. SET in a USB memory
device:
Command message:
RCPN DISK, UDSK, FILE,‗SEAN. SET‘
RELATED COMMANDS
PANEL_SETUP, *SAV, STORE_PANEL,
*RCL