Programming Guide

Digital Oscilloscopes Series
101
WAVEFORM TRANSFER
RECALL, REC
Command
DESCRIPTION
The RECALL command recalls a waveform
file from the current directory on mass storage
into any or all of the internal memories M1 to
M10(or M20 in the CFL series).
COMMAND SYNTAX
<memory>: RECall DISK, <device>, FILE,
‗<filename>‘
<memory> : = {M1~M10}(or M1~M20 in the
CFL series)
<device> : = {UDSK}
<filename>：= A waveform file under a legal
DOS path . A filename-string of up to eight
characters, with the extension “ .DAV ” .
(This can include the ‘/’ character to define
the root directory.)
EXAMPLE
The following recalls a waveform file called
―C1WF.DAV‖ from the memory card into
Memory M1:
Command message:
M1: REC DISK, UDSK FILE, ‗C1WF.DAV‘
RELATED COMMANDS
STORE, INR?
Note:
This command is suitable for non-SPO models.