DataSheet SDS1000CML Series Digital Oscilloscope SIGLENT TECHNOLOGIES Co.,LTD Add: 3/F, Building No.4, Antongda Industrial Zone, 3rd Liuxian Road, Bao'an District, Shenzhen, 518101, China Tel: +86-755-3661 5186 Fax: +86-755-3359 1582 E-mail: sales@siglent.com Website: www.siglent.
CHARACTERISTIC: ● The highest Single real-time sampling rate can to1GSa/s; Equivalent sampling rate is up to 50GSa/s. be up ● Memory Depth: 2Mpts ● Trigger types: Edge, Pulse Width, Video, Slope, Alternative ● Unique Digital Filter function and Waveform recorder function ● Support Pass/Fail function. ●Thirty two parameters Auto measure function. ● Save/recall types: Setups, Waveforms, CSV file, Picture. ● Support Multilingual On-line help system ● Waveform Intensity and Grid Brightness can be adjusted.
Specifications All specification applies to 10X probe and All the SDS1000CML Series Digital Storage Oscilloscopes. To verify that the oscilloscope meets specifications, the oscilloscope must first meet the following conditions: ● The oscilloscope must have been operating continuously for thirty minutes within the specified operating temperature. ● You must perform the Do Self Cal operation, accessible through the Utility menu, if the operating temperature changes by more than 5° C.
Single-shot Bandwidth BW Flatness at BNC input 150MHz(SDS1152CML) 100MHz(SDS1102CML) 70MHz(SDS1072CML） DC -10% of rated BW: +/- 1dB 10% - 50% of rated BW: +/- 2dB 50% - 100% of rated BW: + 2dB/-3dB Lower frequency limit ≤10Hz(at input BNC) (AC -3dB) ≤0.6 Div for average of 10 Pk-Pk readings, Fixed Noise: Pk-Pk for 3K gain settings record ≤0.7 Div for average of 10 Pk-Pk readings, Variable gain settings SFDR including harmonics >=35dB (measured with FFT) ＜ ± 3.
Single Channel:1GSa/s, Real Time Double Channel: 500MSa/s( When timebase Sampling Rate faster than 50ns/div) Equivalent 50GSa/s Sampling Rate Measure Display MAIN, WINDOW, WINDOW ZOOM, ROLL, X-Y Modes Timebase Accuracy ±100ppm measured over 1ms interval 5ns/DIV – 50s/DIV（SDS1072CML）; Horizontal Scan 2.5ns/DIV – 50s/DIV（SDS1102CML/1152CML） Range Scan: 100ms/DIV ～50s/DIV (1-2.
Alternative Trigger X-Y Mode X-pole Input / Y-Pole Input Sample Frequency CH1 trigger type: Edge, Pulse, Video, Slope CH2 trigger type: Edge, Pulse, Video, Slope Channel 1 (CH1) / Channel 2 (CH2) XY mode has a breakthrough that trad oscilloscopes restrict sampling rate at 1MSa/s. Support 25Ksa/s～250Msa/s adjusted. Hard Ware Frequency Counter Reading resolution 1Hz Accuracy ±0.
Liquid Crystal Display Resolution 480 horizontal by 234 vertical pixels Display Color 24 bit Display Contrast （Typical state） 150:1 Backlight Intensity（Typical state） 300nit Wave display range 8 x 18 div Wave Display Mode Dots, Vector Persist Off, 1 sec, 2 sec, 5 sec, Infinite Menu Display 2 sec, 5 sec, 10 sec, 20 sec, Infinite Off,1min,2min,5min,10min,15min,3 Screen-Saver 0min,1hour,2hour,5hour Classical, Modern, Tradition, Skin Succinct waveform interpolation Sin(x)/x，Linear Color model Normal , Invert Si
NAME: SDS1000CML series Digital Oscilloscope TYPE: SDS1072CML 70MHz SDS1102CML 100MHz SDS1152CML 150MHZ Standard Accessories: ● 1:1/10:1 probe (2 PCS) ● Power Cable that fits the standard of destination country ● Qualified Certification. ● Guaranty Card ● CD (including EasyScope computer software system) ● User Manual ● USB Cable SIGLENT TECHNOLOGIES Co.,LTD Add: 3/F, Building No.
