Quick Start Guide

Chapter 3 System Utility Function SIGLENT
SDL1000X User Manual 77
Figure 3-10 Restore factory setting interface
When user selects OK, the parameters in every function will restore to
defaults.
5. Upgrade
The SDL1 can be upgraded with new firmware using an external FAT32
formatted USB memory device.
To update the firmware, press Shift and CP key to enter system utility
function interface. Then switch to page 2 and press the “Upgrade” key on
the front panel. Finally, select the proper firmware upgrade version in the
interface of the USB file catalogue.
NOTE: Firmware updates can be found on the product page located on the
website (www.siglent.com, www.siglentamerica.com, www.siglenteu.com)
6. BoardTest
Users can check the current status of the load by using the BoardTest
function. This feature tests the keypad LEDs, LCD,, Keyboard, Buzzer
and Chip test function.
 LED Test: Test whether the LED lights responsible for keypad
backlighting are operational
 LCD Test: Test whether the LED screen display is operational
 Keyboard Test: Test whether the function of all keys except the power