Quick Start Guide

Chapter 2 Function and Features SIGLENT
SDL1000X User Manual 27
Figure 2-16 CC Cont mode page 2
Figure 2-17 CC Cont mode page 3
The parameters for the continuous operation mode include Function,
Mode, range, A _Level, B_Level, rising slew rate, falling slew rate,
A_width, B_width and trigger selection. The interface menu can be
divided into three pages.
Set range
Current range: 5 A or 30 A
Voltage range: 36 V or 150 V
Set A_level
The sink current toggles between a high value and a low value in
continuous mode. The A_Level indicates a low value. The default unit
for A_Level is Ampere (A).