Quick Start Guide

SIGLENT Chapter 2 Function and Features
SDL1000X User Manual 16
Static Operation Mode
The static operation modes include the following 4 modes:
 Constant Current (CC) Mode
 Constant Voltage (CV) Mode
 Constant Resistance (CR) Mode
 Constant Power (CP) Mode
Constant Current (CC) Mode
In CC mode, the electronic load will sink a current in accordance with the
programmed value regardless of the input voltage, as shown in Figure 2-1.
Constant Current Mode
Figure 2-1 Voltage-Current Relationship Schema under CC Mode
Operating Steps
1. Turn off the instrument, as shown in Figure 2-2, connect the DUT
and the channel input terminals on the front panel of the load.