Quick Start Guide

SIGLENT Chapter 1 Start Guide
To Power on the instrument
After the instrument is connected to the power source, press the Power key
at the left bottom of the front panel to power on the instrument. When the
instrument is turned on, it will undergo a self-test. If the instrument passes the
self-test, the welcome interface is displayed. If the instrument fails, the
self-test failure information will be displayed. If you encounter any problems
or failures, please contact your nearst SIGLENT support office.
CAUTION
Ensure that the AC selector setting on the rear panel of the
instrument matches the actual AC input voltage, otherwise, the
electronic load could be damaged.
CAUTION
Please pay attention to the positive and negative polarities of the
electronic load to avoid incorrect connections. Otherwise, the load
can be damaged.