Quick Start Guide

Chapter 1 Start Guide SIGLENT
The specified fuse must be rated for the input voltage (Please refer
to the “ AC input voltage description”)
5. AC line power selection switch
AC Input Voltage: 110/220 V
6. LAN interface
Connect to the local network (LAN) using a standard RJ45 interface.
7. USB device
Connect the instrument (as a controlled device) to an external
computer/controller via USB.
8. GPIB interface
Connect to a controlling computer GPIB card through the IEEE488
bus.
9. Current detection terminal
Observe the current input to the SDL by connecting the current
detection terminal to a measurement instrument (oscilloscope, DMM) to
analyze the change of input current with respect to time.
10. Voltage detection terminal
Observe the voltage input to the SDL by connecting the voltage
detection terminal to a measurement instrument (oscilloscope, DMM) to
analyze the change of input voltage with respect to time.
11. Sense terminal, External control terminal, PWM output terminal
Select different ports to realize its function
12. FAN