Programming Guide

SIGLENT
SDL1000X Programming Guide 53
Command
Format
EXT:VRANGe <value>
Description
Sets the voltage range in external sink mode of the electronic load.
Example
EXT:VRANGe 36
Command
Format
EXT:VRANGe?
Description
Query the voltage range in external sink mode of the electronic
load.
Example
EXT:VRANGe?
Response
150
Command
Format
TIME:TEST[:STATe] {ON | OFF | 0 | 1}
Description
Sets whether enable the time measurement switch.
Example
TIME:TEST:STATe OFF
Command
Format
TIME:TEST[:STATe]?
Description
Query whether the time measurement switch is enabled.
Example
TIME:TEST:STATe?
Response
0
Command
Format
TIME:TEST:VOLTage:LOW {< value > | MINimum | MAXimum
| DEFault}
Description
Sets the V_Low voltage in the time measurement function
(SLMT).
Example
TIME:TEST:VOLTage:LOW 1.000
Command
Format
TIME:TEST:VOLTage:LOW?
Description
Query the V_Low voltage in the time measurement function
(SLMT).
Example
TIME:TEST:VOLTage:LOW?
Response
3.00