Programming Guide

SIGLENT
SDL1000X Programming Guide 51
Description
Sets whether enable the voltage monitoring terminal switch of the
electronic load.
Example
SYSTem:VMONItor:STATe OFF
Command
Format
SYSTem: VMONItor [:STATe]?
Description
Query whether the voltage monitoring terminal switch of the
electronic load is enabled.
Example
SYSTem: VMONItor:STATe?
Response
1
Command
Format
STOP:ON:FAIL[:STATe] {ON | OFF | 0 | 1}
Description
Sets whether stop the PROGRAM test when test step is failed.
Example
STOP:ON:FAIL:STATe OFF
Command
Format
STOP:ON:FAIL[:STATe]?
Description
Query whether the SOF switch is enabled.
Example
STOP:ON:FAIL:STATe?
Response
1
Command
Format
*TRG
Description
Generate a trigger in the electronic load.
Example
*TRG
Command
Format
TRIGger:SOURce {MANUal | EXTernal | BUS}
Description
Sets the trigger source of the electronic load.
Example
TRIGger:SOURce BUS
Command
Format
TRIGger:SOURce?
Description
Query the trigger source of the electronic load.
Example
TRIGger:SOURce?
Response
MANUAL