Programming Guide

SIGLENT
SDL1000X Programming Guide 49
Command
Format
[:SOURce]:CURRent:PROTection:DELay?
Description
Query the delay time of the current protection of the electronic
load.
Example
:SOURce:CURRent:PROTection:DELay?
Response
3.000
Command
Format
[:SOURce]:POWer:PROTection:STATe {ON | OFF | 0 | 1}
Description
Sets whether enable the power protection switch of the electronic
load.
Example
:SOURce:POWer:PROTection:STATe ON
Command
Format
[:SOURce]:POWer:PROTection:STATe?
Description
Query whether the power protection switch of the electronic load is
enabled.
Example
:SOURce:POWer:PROTection:STATe?
Response
1
Command
Format
[:SOURce]:POWer:PROTection:LEVel {< value > | MINimum |
MAXimum | DEFault}
Description
Sets the threhold value of the power protection of the electronic
load after enable the power protection function.
Example
:SOURce:POWer:PROTection:LEVel 7.00
Command
Format
[:SOURce]:POWer:PROTection:LEVel?
Description
Query the threhold value of the power protection of the electronic
load.
Example
:SOURce:POWer:PROTection:LEVel?
Response
8.000
Command
Format
[:SOURce]:POWer:PROTection:DELay {< value > | MINimum |
MAXimum | DEFault}
Description
Sets the delay time of the power protection of the electronic load
after enable the power protection function.
Example
:SOURce:POWer:PROTection:DELay 2.00