Programming Guide

SIGLENT
SDL1000X Programming Guide 45
Command
Format
[:SOURce]:PROGram:LED:RCOnf <step, {< value > | MINimum |
MAXimum | DEFault}>
Description
Sets the “Rco” value of the step which is set in this command in
PROGRAM function when the step is in LED mode.
Example
:SOURce:PROGram: LED: RCOnf 6,0.300
Command
Format
[:SOURce]:PROGram:LED:RCOnf? <step>
Description
Query the “Rco” value of the step which is set in this command in
PROGRAM function when the step is in LED mode.
Example
:SOURce:PROGram: LED: RCOnf? 5
Response
0.200
Command
Format
[:SOURce]:PROGram:STATe:ON
Description
Enter the PROGRAM test mode of the eclectronic load .
Example
:SOURce:PROGram:STATe:ON
Command
Format
[:SOURce]:PROGram:STATe?
Description
Query whether the load is in PROGRAM test mode.
Example
:SOURce:PROGram:STATe?
Response
0
Command
Format
[:SOURce]:PROGram:TEST? <step>
Description
Query the test rusult of the step which is set in this command in
PROGRAM test list.
Example
:SOURce:PROGram:TEST? 3
Response
3.584720
3.3.12 Source Wave Subsystem Command
Command
Format
[:SOURce]:WAVE:TIME < number >
Description
Sets the window time in Waveform Display Function. Its unit is “s”
Example
:SOURce:WAVE:TIME 8