Programming Guide

SIGLENT
SDL1000X Programming Guide 44
Description
Sets the maximum allowed value of the step which is set in this
command in PROGRAM test list. The value is current value in CV
and is voltage value in CC/CR/CP/LED.
Example
:SOURce:PROGram: MAX 2,10.000
Command
Format
[:SOURce]:PROGram:MAX? <step>
Description
Query the minimum allowed value of the step which is set in this
command in PROGRAM test list. The value is current value in CV
and is voltage value in CC/CR/CP/LED.
Example
:SOURce:PROGram:MAX? 3
Response
15.000
Command
Format
[:SOURce]:PROGram:LEVel <step, {< value > | MINimum |
MAXimum | DEFault}>
Description
Sets the sink value of the step which is set in this command in
PROGRAM test list.
Example
:SOURce:PROGram:LEVel 6,7.000
Command
Format
[:SOURce]:PROGram:LEVel? <step>
Description
Query the set value of the step which is set in this command in
PROGRAM test list.
Example
:SOURce:PROGram:LEVel? 2
Response
6.000
Command
Format
[:SOURce]:PROGram:LED:CURRent <step, {< value > |
MINimum | MAXimum | DEFault}>
Description
Sets the Io value of the step which is set in this command in
PROGRAM function when the step is in LED mode.
Example
:SOURce:PROGram: LED:CURRent 6,7.000
Command
Format
[:SOURce]:PROGram:LED:CURRent? <step>
Description
Query the Io value of the step which is set in this command in
PROGRAM function when the step is in LED mode.
Example
:SOURce:PROGram: LED:CURRent? 4
Response
1.000