Programming Guide

SIGLENT
SDL1000X Programming Guide 40
Command
Format
[:SOURce]:OPP:VOLTage {< value > | MINimum | MAXimum |
DEFault}
Description
Sets the protection voltage in OPPT function.
Example
:SOURce:OPP: VOLTage 8.000
Command
Format
[:SOURce]:OPP:VOLTage?
Description
Query the value of the protection voltage in OPPT function.
Example
:SOURce:OPP: VOLTage?
Response
10.000
3.3.11 Source Program Subsystem Command
Command
Format
[:SOURce]:PROGram:STEP {< number > | MINimum |
MAXimum | DEFault}
Description
Sets the execution of steps in PROGRAM function.
Example
:SOURce:PROGram:STEP 8
Command
Format
[:SOURce]:PROGram:STEP?
Description
Query the execution of steps in PROGRAM function.
Example
:SOURce:PROGram:STEP?
Response
10
Command
Format
[:SOURce]:PROGram:MODE <step, {CURRent | VOLTage |
POWer | RESistance | LED}>
Description
Sets the mode of the step which is set in this command in
PROGRAM test list.
Example
:SOURce:PROGram:MODE 2,VOLTage
Command
Format
[:SOURce]:PROGram:MODE? <step>
Description
Query the mode of the step which is set in this command in
PROGRAM test list.
Example
:SOURce:PROGram:MODE? 3
Response
2.000
Command
[:SOURce]:PROGram:IRANGe <step, value>