Programming Guide

SIGLENT
SDL1000X Programming Guide 39
Command
Format
[:SOURce]:OPP:STEP:DELay?
Description
Query the delay time of each step in OPPT function.
Example
:SOURce:OPP:STEP:DELay?
Response
2.000
Command
Format
[:SOURce]:OPP:END {< value > | MINimum | MAXimum |
DEFault}
Description
Sets the stop power value in OCPT function.
Example
:SOURce:OPP: END 5.000
Command
Format
[:SOURce]:OPP:END?
Description
Query the stop power value in OPPT function.
Example
:SOURce:OPP: END?
Response
4.000
Command
Format
[:SOURce]:OPP:MIN {< value > | MINimum | MAXimum |
DEFault}
Description
Sets the minimum value of the protection power in OPPT function.
Example
:SOURce:OPP: MIN 2.000
Command
Format
[:SOURce]:OPP:MIN?
Description
Query the minimum value of the protection power in OPPT
function.
Example
:SOURce:OPP: MIN?
Response
3.000
Command
Format
[:SOURce]:OPP:MAX {< value > | MINimum | MAXimum |
DEFault}
Description
Sets the maximum value of the protection power in OPPT function.
Example
:SOURce:OPP: MAX 10.000
Command
Format
[:SOURce]:OPP:MAX?
Description
Query the maximum value of the protection power in OPPT
function.
Example
:SOURce:OPP: MAX?
Response
8.000