Programming Guide

SIGLENT
SDL1000X Programming Guide 38
Command
Format
[:SOURce]:OPP:VRANGe <value>
Description
Sets the voltage range in OPPT function.
Example
:SOURce:OPP:VRANGe 36
Command
Format
[:SOURce]:OPP:VRANGe?
Description
Query the voltage range in OPPT function.
Example
:SOURce:OPP:VRANGe?
Response
150
Command
Format
[:SOURce]:OPP:STARt {< value > | MINimum | MAXimum |
DEFault}
Description
Sets the power value when the load starts in OPPT test.
Example
:SOURce:OPP:STARt 1.000
Command
Format
[:SOURce]:OPP:STARt?
Description
Query the power value when the load starts in OPPT test.
Example
:SOURce:OPP:STARt?
Response
1.000
Command
Format
[:SOURce]:OPP:STEP {< value > | MINimum | MAXimum |
DEFault}
Description
Sets the step power value in OPPT function.
Example
:SOURce:OPP: STEP 0.500
Command
Format
[:SOURce]:OPP:STEP?
Description
Query the step power value in OPPT function.
Example
:SOURce:OPP: STEP?
Response
1.000
Command
Format
[:SOURce]:OPP:STEP:DELay {< value > | MINimum |
MAXimum | DEFault}
Description
Sets the delay time of each step in OPPT function.
Example
:SOURce:OPP:STEP:DELay 1.000