Programming Guide

SIGLENT
SDL1000X Programming Guide 36
Command
Format
[:SOURce]:OCP:STEP:DELay?
Description
Query the delay time of each step in OCPT function.
Example
:SOURce:OCP:STEP:DELay?
Response
2.000
Command
Format
[:SOURce]:OCP:END {< value > | MINimum | MAXimum |
DEFault}
Description
Sets the stop current in OCPT function.
Example
:SOURce:OCP: END 5.000
Command
Format
[:SOURce]:OCP:END?
Description
Query the stop current in OCPT function.
Example
:SOURce:OCP: END?
Response
4.000
Command
Format
[:SOURce]:OCP:MIN {< value > | MINimum | MAXimum |
DEFault}
Description
Sets the minimum value of the protection current in OCPT
function.
Example
:SOURce:OCP: MIN 2.000
Command
Format
[:SOURce]:OCP:MIN?
Description
Query the minimum value of the protection current in OCPT
function.
Example
:SOURce:OCP: MIN?
Response
3.000
Command
Format
[:SOURce]:OCP:MAX {< value > | MINimum | MAXimum |
DEFault}
Description
Sets the maximum value of the protection current in OCPT
function.
Example
:SOURce:OCP: MAX 10.000
Command
Format
[:SOURce]:OCP:MAX?
Description
Query the maximum value of the protection current in OCPT