Programming Guide

SIGLENT
SDL1000X Programming Guide 34
Command
Format
[:SOURce]:LIST:WIDth? <step>
Description
Query the run time of the step which is set in this command in
LIST sequence.
Example
:SOURce:LIST:WIDth? 5
Response
0.100
Command
Format
[:SOURce]:LIST:STATe:ON
Description
Enter the LIST function of the eclectronic load.
Example
:SOURce:LIST:STATe:ON
Command
Format
[:SOURce]:LIST:STATe?
Description
Query whether the electronic load is in LIST test mode.
Example
:SOURce:LIST:STATe?
Response
0.100
3.3.9 Source OCPT Subsystem Command
Command
Format
[:SOURce]: OCP:FUNC
Description
Enter the OCPT function of the eclectronic load.
Example
:SOURce: OCP:FUNC
Command
Format
[:SOURce]: OCP:FUNC?
Description
Query whether the electronic load is in OCPT test mode.
Example
:SOURce: OCP:FUNC?
Response
0
Command
Format
[:SOURce]:OCP:IRANGe <value>
Description
Sets the current range in OCPT function.
Example
:SOURce:OCP:IRANGe 30
Command
Format
[:SOURce]:OCP:IRANGe?
Description
Query the current range in OCPT function.