Programming Guide

SIGLENT
SDL1000X Programming Guide 33
Description
Sets the execution of steps in LIST function.
Example
:SOURce:LIST: STEP 5
Command
Format
[:SOURce]:LIST:STEP?
Description
Query the execution of steps in LIST function.
Example
:SOURce:LIST:STEP?
Response
15
Command
Format
[:SOURce]:LIST:LEVel <step,value>
Description
Sets the set value of the step which is set in this command in LIST
sequence.
Example
:SOURce:LIST:LEVel 3,4.500
Command
Format
[:SOURce]:LIST:LEVel? <step>
Description
Query the set value of the step which is set in this command in
LIST sequence.
Example
[:SOURce]:LIST:LEVel? 5
Response
2.000
Command
Format
[:SOURce]:LIST:SLEW[:BOTH] <step,value>
Description
Sets the slope of the step which is set in this command in LIST CC
mode.
Example
:SOURce:LIST:SLEW:BOTH 4,0.500
Command
Format
[:SOURce]:LIST:SLEW[:BOTH]? <step>
Description
Query the slope of the step which is set in this command in LIST
CC mode.
Example
:SOURce:LIST:SLEW:BOTH? 5
Response
0.100
Command
Format
[:SOURce]:LIST:WIDth <step,value>
Description
Sets the run time of the step which is set in this command in LIST
sequence.
Example
:SOURce:LIST:WIDth 3,1.000