Programming Guide
SIGLENT
SDL1000X Programming Guide 28
Command
Format
[:SOURce]:BATTery:MODE {CURRent | POWer | RESistance}
Description
Sets CC/CP/CR mode in BATTERY function.
Example
:SOURce:BATTery:MODE POWer
Command
Format
[:SOURce]:BATTery:MODE?
Description
Query the current mode in BATTERY function.
Example
:SOURce:BATTery:MODE?
Response
CURRENT
Command
Format
[:SOURce]:BATTery:IRANGe <value>
Description
Sets the current range in BATTERY function.
Example
:SOURce:BATTery:IRANGe 6.000
Command
Format
[:SOURce]:BATTery:IRANGe?
Description
Query the current range in BATTERY function.
Example
:SOURce:BATTery:IRANGe?
Response
30
Command
Format
[:SOURce]:BATTery:VRANGe <value>
Description
Sets the voltage range in BATTERY function.
Example
:SOURce:BATTery:IRANGe 22.000
Command
Format
[:SOURce]:BATTery:VRANGe?
Description
Query the voltage range in BATTERY function.
Example
:SOURce:BATTery: VRANGe?
Response
150
Command
Format
[:SOURce]:BATTery:RRANGe {LOW | MIDDLE | HIGH |
UPPER}
Description
Sets the resistor range in BATTERY function.
Example
:SOURce:BATTery:IRANGe UPPER
Command
[:SOURce]:BATTery:RRANGe?