Programming Guide

SIGLENT
SDL1000X Programming Guide 26
Description
Sets the B Level pulse width time value of CR mode in transient
operation. Its unit is “s”.
Example
:SOURce:RESistance:TRANsient:BWIDth 0.800
Command
Format
[:SOURce]:RESistance:TRANsient:BWIDth?
Description
Query the B Level pulse width time value of CR mode in transient
operation. Its unit is “s”.
Example
:SOURce:RESistance:TRANsient:BWIDth?
Response
1.500
3.3.6 Source LED Subsystem Command
Command
Format
[:SOURce]:LED:IRANGe <value>
Description
Sets the current range of LED mode in static operation.
Example
:SOURce:LED:IRANGe 12
Command
Format
[:SOURce]:LED:IRANGe?
Description
Query the current range of LED mode in static operation.
Example
:SOURce:LED:IRANGe?
Response
30
Command
Format
[:SOURce]:LED:VRANGe <value>
Description
Sets the voltage range of LED mode in static operation.
Example
:SOURce:LED:VRANGe 40
Command
Format
[:SOURce]:LED:VRANGe?
Description
Query the voltage range of LED mode in static operation.
Example
:SOURce:LED:VRANGe?
Response
150
Command
Format
[:SOURce]:LED:VOLTage {< value > | MINimum | MAXimum |
DEFault}
Description
Sets the “Vo ” preset voltage of LED mode in static operation.
Example
:SOURce:LED: VOLTage 10