Programming Guide

SIGLENT
SDL1000X Programming Guide 22
Command
Format
[:SOURce]:POWer:TRANsient:BLEVel?
Description
Query the B Level of CP mode in transient operation.
Example
:SOURce:POWer:TRANsient:BLEVel?
Response
10.000
Command
Format
[:SOURce]: POWer:TRANsient:AWIDth {<value> | MINimum |
MAXimum | DEFault}
Description
Sets the A Level pulse width time value of CP mode in transient
operation. Its unit is “s”
Example
:SOURce: POWer:TRANsient:AWIDth 0.700
Command
Format
[:SOURce]:POWer:TRANsient:AWIDth?
Description
Query the A Level pulse width time value of CP mode in transient
operation. Its unit is “s”
Example
:SOURce:POWer:TRANsient:AWIDth?
Response
2.000
Command
Format
[:SOURce]: POWer:TRANsient:BWIDth {<value> | MINimum |
MAXimum | DEFault}
Description
Sets the B Level pulse width time value of CP mode in transient
operation. Its unit is “s”
Example
:SOURce: POWer:TRANsient:BWIDth 0.800
Command
Format
[:SOURce]:POWer:TRANsient:BWIDth?
Description
Query the B Level pulse width time value of CP mode in transient
operation. Its unit is “s”
Example
:SOURce:POWer:TRANsient:BWIDth?
Response
1.500
3.3.5 Source Resistance Subsystem Command
Command
Format
[:SOURce]: RESistance [:LEVel][:IMMediate] {<value> |
MINimum | MAXimum | DEFault}
Description
Sets the preset resistor value of CR mode in static operation.
Example
:SOURce: RESistance:LEVel:IMMediate 3.000