Programming Guide

SIGLENT
SDL1000X Programming Guide 12
Example
:SOURce:FUNCtion:TRANsient VOLTage
Command
Format
[:SOURce]:FUNCtion:TRANsient?
Description
Query current mode in transient operation.
Example
:SOURce:FUNCtion:TRANsient?
Response
1
Command
Format
[:SOURce]:FUNCtion {CURRent | VOLTage | POWer |
RESistance | LED}
Description
Sets mode in static operation (CC/CV/CP/CR/LED)
Example
:SOURce:FUNCtion LED
Command
Format
[:SOURce]:FUNCtion?
Description
Query current mode in static operation.
Example
:SOURce:FUNCtion?
Response
RESISTANCE
Command
Format
[:SOURce]:TEST:STEP?
Description
Query the number of running step in the LIST/PROGRAM test
sequence.
Example
:SOURce:TEST:STEP?
Response
3
Command
Format
[:SOURce]:TEST:STOP?
Description
Query whether the running steps of the test sequence stop or not.
Resturns “1” if test stop or return “0” if test stop.
Example
:SOURce:TEST:STOP?
Response
1
3.3.2 Source Current Subsystem Command
Command
Format
[:SOURce]:CURRent[:LEVel][:IMMediate] {<value> | MINimum
| MAXimum | DEFault}
Description
Sets the sink current value of CC mode in static operation.
Example
:SOURce:CURRent:LEVel:IMMediate 0.845