Programming Guide

SIGLENT
SDL1000X Programming Guide 10
Command
Format
*WAI
Description
This command causes the instrument to wait until all pending
commands are completed before executing any additional
commands.
Example
*WAI
3.2 Measure Subsystem command
Command
Format
MEASure:VOLTage[:DC]?
Description
Gets the real-time voltage measurement value
Example
MEASure:VOLTage:DC?
Response
7.924678
Command
Format
MEASure:CURRent[:DC]?
Description
Gets the real-time current measurement value
Example
MEASure: CURRent:DC?
Response
3.986634
Command
Format
MEASure:POWer[:DC]?
Description
Gets the real-time power measurement value
Example
MEASure:POWer:DC?
Response
31.867329
Command
Format
MEASure:RESistance[:DC]?
Description
Gets the real-time resistor measurement value
Example
MEASure: RESistance:DC?
Response
5.842789
Command
Format
MEASure:EXT?
Description
Gets the real-time external measurement value in external sink
mode.
Example
MEASure: EXT?
Response
3.863521