Data Sheet

WWW.SIGLENT.COM
SDL1000X Programmable DC Electronic Load
Voltage Rise/Fall speed test
Waveform trend chart function
Voltage threshold function
Save/Recall setting parameters
External analog control Multiple protection modes
The electronic load is also equipped to directly measure voltage rise
and fall times. It can calculate the time from one voltage to another
without the need for additional measurement instrumentation. With an
SDL1000X, you can save money and improve efciency.
The electronic load includes a waveform display function and supports
the following operations for the waveform: Pause, recording, and
capturing the waveform. You can quickly observe the trends of parameter
changes as they occur throughout the test.
The SDL1000X can be set to turn on or off if the input voltage is at,
above, or below a set value. By dening these thresholds, you control
when the load is active. Which minimizes test time and increases safety.
The load allows you to save different types of les to the internal and
external memories. You can recall and read them when necessary.
The load allows the user to control current or voltage through external
analog terminals (EXT PRG). Input a 0-10 V analog to adjust 0-100%
rated voltage and current. It is very useful for those applications that
need to change the input value with external signals.
The SDL1000X series Programmable DC Electronic Load provides five
protection types: OVP, OCP, OPP, OTP and LRV. When OVP/OCP/OPP/
OTP/reverse voltage protection (LRV) occurs, the load will immediately
turn off the input and stop sinking. Then, a prompt message is displayed.