User's Manual

• Up to seven light or darks spots on the LCD display is acceptable and not considered defective.

STORAGE

Always store the unit in its carring case or on a rie in a dry, well ventilated space. For prolong storage , remove the

batteries

TROUBLESHOOTING

Never ship back a product without getting proper authorization beforehand. Doing so could result in losing the prod-

uct due to a multitude of reasons, i.e. sending it to the wrong address and other problems associated with unexpected

packages.

The unit will not turn on:

1. Check the polarity of the batteries. Reinstall the batteries if necessary.

2. Clean the battery compartment contacts with denatured alcohol and a cotton swab.

3. Install fresh batteries.

The IR illuminator will not turn on:

1. Adjust the brightness of the IR, noting brightness indication on the display. Adjust the display brightness. If no IR

light is being detected the unit may need to be returned for service.

The image is dark:

1. Make sure the lens caps on the objective lens is opened and the IR illuminator is on. Adjust the display brightness

and the IR illuminator brightness accordingly to obtain a bright, clear image. For best imaging using performance, if

using at night use with the lens cap open. If using in daylight use with lens cap closed.