User's Manual
25
7. Rotate the controller to select the zero icon, , press the controller to start the zeroing process.
8. Next, an auxiliary cross (C) will appear in the center of the display. On the left side of the display X/Y coordinates
will appear. X/Y coordinates indicate the location of the auxiliary cross on the display.
9. By keeping the cross (C) aimed at the center of the target (original aiming point), rotate the controller to move
the reticle to match the point of impact. To switch between horizontal (windage) and vertical movement (eleva-
tion) push the controller once. Direction for the coordinates switches from left/right arrows (windage) to up/down
arrows (elevation).
10. Next, press and hold the controller button to save the reticle adjustment. Message “ok” conrms the adjust-
ment has been saved. The reticle will now move to the point of impact.
11. Conrm zero by ring another shot. The reticle and point of impact should now match.
Note: Do note turn o the sight before zero settings are saved. Step 10 above must be performed in order to save the zero adjustment, otherwise your
settings will be lost. Total windage and elevation travel range of the reticle is +/- 50 clicks. Click values are approximately .1 mil or .34 MOA