User's Manual

24
Reticle selection
The Photon RT is equipped with 6 reticle options the user can select based on their hunting needs and preference.
To select the reticle:
1. Enter the submenu by selecting the reticle icon, , with the controller (3).
2. Rotate the controller to change the reticle designs shown on the display.
3. Conrm the reticle selection with a short press of the controller.
4. To exit the menu, keep the controller pressed for two seconds or wait 10 seconds to exit automatically.
Note: When using digital zoom, the reticle does not change size. Reticle selection is saved and will be same reticle design next time the unit is turned on.
One Shot Zeroing
The Photon RT is equipped with the “one shot” zeroing feature. Zeroing should be done safely on a ring range. It is
recommended to zero the Photon RT in the same operating temperatures. Always use the same ammo manufacturer
and grain, any change in ammo may require the Photon RT be re-zeroed.
To zero:
1. For improved ease of use, mount the rie in a benchrest.
2. Set a target at a distance of 100 yards.
3. Turn on the Photon RT and adjust focus to obtain a clear picture of the target.
4. Aim at the center of the target. Take one shot at the target. Do not move the rie and ensure the sight remains
aimed at the same central point on the target.
5. Examine the target and determine if the aiming point is aligned with the point of impact.
6. To make adjustment, open the menu system by pressing and holding the controller (3).