User's Manual

21
Wi-Fi setup allows you to set a password for the access point. This password is used to connect an external device
(smartphone for example) to the Photon RT.
To setup Wi password:
1. Enter the submenu by selecting the lock icon, .
2. A password will appear on the display, default password is 12345.
3. Rotate the controller to set your desired password. Clockwise rotation of the controller will increase the value.
Counterclockwise rotation will decrease the value. To switch between digits, briey press the controller.
4. To save the password and exit password submenu, hold down the controller for longer than one second.
Wi-Fi setup also allows users to set access levels. This feature allows users to restrict access to others to only see
video streaming from the device and not have the ability to access the device’s functions.
To set access levels:
1. Enter the submenu by selecting the access icon, , with the controller (3).
2. Select access level Owner, or the house icon, . This gives Stream Vision users connected to your device com-
plete access to all the device’s functions.
3. Select access level Guest, or the door icon, . This gives Stream Vision users connected to your device access
only to the video stream for remote viewing.
Recording Resolution
The recording resolution of the Photon RT can be changed for video and photos. Lower resolution video and
photos require less memory and will provide longer video record times, or storage of more photos.