User's Manual
Mini base station installation
guide
Ref.: MAN/DPL/000
Rev.: 0.2
Date:03/05/2016
© Copyright SIGFOX. All rights reserved Page 9 of 16
USB 3G key (if 3G coverage
3G key
- SIGFOX 1
Activated M2M SIM card
-
DISTRIBUTOR
1
POE injector
POE Injector + power cable
supply
4 SIGFOX 1
5 CABLE ETHERNET POE
The Ethernet cable must be a category 6 or 6a. The maximum length of the cable depends on its gauge.
Gauge > AWG25: 100m maximum
Gauge = AWG26: 50m maximum
The shielding of the Ethernet cable should be SFTP or SSTP.
The Ethernet cable is connected to the mini base station from one side and to a POE injector at the other side.
The modem (SAT or ADSL) is connected to the POE injector. The POE injector is connected to the power
supply.
6 ELECTRICAL CONNECTION
N Fem Connector
RJ45 POE port
USB ports
DEL
3G Key
Maintenance port