User's Guide

installation Guide

Ref.: MAN/DPL/EN/001

Rev.: 2.3

Date: 29 August 2014

• The distance between antenna and tower must be in the range of 1.2 to 1.5m

• The mounting support diameter must be in the range of 40 to 50mm and be hot deep galvanized

inside as well as outside

• The antenna must be fixed by nuts and jam nuts

5.3

Recommendations:

• Ensure the waterproofness (must be 100%) of the connector with a self-vulcanizing scotch-seal

(rubber mastic tape) , then with and finally with 2 zip tie-wraps

• The tightening of RF connectors must be made manually.